Dent Out

Conventional Dent Repair Basics – Madison WI

Dent Repair | Dent Removal | Madison WI | Auto Color | Middleton WI

Conventional dent repair requires damaged paint to be repaired and the stretched metal to be pulled as close to original, but still slightly concave

Conventional dent repair and paintless dent repair are often times confused.

Most people just want their cars fixed and the dent repair completed. They would also like to have a high quality dent repair and spend as little money as possible.

Too many people who have had the option of using a paintless dent repair process, the concept of just “popping” out a dent is an easy one. However, for this option to be used, there are a couple of factors determining whether paintless dent repair is even an option.

First – the finish cannot be broken with a scratch, scrape or chip. If the finish is broken, while the dent can be removed, the broken finish will eventually allow rust.

Second – the metal cannot be stretched. If the metal is stretched, it will have more surface area than the dimensions of the dent itself. In other words, there will be too much surface area to fit into the original contours of the panel with the dent. If the metal is pulled out too far the panel would actually have a lump. Continue reading

Paintless Dent Repair Defined In Madison WI

Paintless Dent Repair | Dent Removal | Madison WI | Auto Color

Paintless dent repair, or PDR, can remove dents when the finish of the car is not harmed or broken

Paintless Dent Repair, or PDR, is an auto body industry recognized dent removal process. It involves the removal of hail dents and other types of damage on exterior surface panels without disturbing a vehicle’s finish.

How Paintless Dent Repair Works

In the majority of cases, the paintless dent repair procedure involves using specialized tools for applying pressure to the backsides of panels to remove surface indentations.

A second paintless dent repair technique involves bonding a “tab” or another device to the exterior of a panel. When the “tab” is affixed, the dent is then pulled out from the outside of the panel. Continue reading